You were using your standing desk usually every day, and an ASR came written on your control panel.
And you might be wondering what does ASR mean on standing desk?
In this article, I’ll discuss what ASR is on a standing desk and 5 simple ways to solve it.
So, let’s dive in!
Key Takeaway
- An ASR is an error code displayed on the control panel of your standing desk which shows that your desk needs a reset.
- To solve the ASR error, try checking for loose cables, remove the excess weight, and give your standing desk a reset.
What Does ASR Mean on Standing Desk?
An ASR is an error code displayed on the control panel of your standing desk which shows that your desk needs a reset.
Furthermore, it’s also caused if your standing desk is titled on any side more than 8°.
How to Get Rid of the ASR Code From Your Sit-stand Desk Display?
To get rid of the ASR error code follow the following steps:
- One is to unplug the power cord from the back of the display and then plug it back in. This will reset the display and should get rid of the ASR code.
- You can also try pressing and holding the power button on the display for about 30 seconds. This will also reset the display and should get rid of the ASR code.
5 Ways to Solve the ASR Error
If you are troubleshooting the ASR error, there are a few things you can do to solve the problem. Below are five ways to fix the ASR error:
1. Error in ASR System
ASR error code appears when the system detects an error in the ASR system.
There are many reasons why this error code appears, but the most common reason is that the ASR system is not properly calibrated.
If the ASR system is not properly calibrated, it will not be able to properly detect errors in the system. This can lead to false positives or false negatives, which can cause the ASR system to generate an error code.
2. Fix Loose Cables
The cable error on the ASR is a very common error that can occur when the wrong cables are used. This error can also be caused by a bad connection or by a loose cable.
If you are getting this error, it is important to check all of your connections and make sure that they are tight. You may also want to try another set of cables.
3. Try Unloading the Desk
If your desk is overloaded according to the normal weight capacity, it might also start malfunctioning. This will cause the led display to display an ASR error code.
Must Read: 5 Best Standing Desk Under 300 USD
This is also the reason that it shows an error so remove the extra or overweight from your standing desk or sit stand desk.
4. Fix the Uneven Legs
Uneven leg failure may occur if the standing desk isn’t assembled correctly or due to uneven adjustments, especially in dual-motor models.
So If this happens, you’ll need to disconnect all the wires from the control box and reconnect them and place your desk correctly.
Next, you’ll need to reset your desk to continue working normally.
5. Prevent Loss of Power and Memory
It happens due to accidental unplugging or an outage. When your table regains power, it will likely go into reset mode and display the ASR code.
Another common reason for the ASR error code to appear is if there is a problem with the ASR data.
If the ASR data is corrupted, it can cause the ASR system to generate an error code. This is why it is important to make sure that the ASR data is backed up regularly.
Bonus: Fix Control box Overheating
Due to the continuous movement of the desk then H01 code error appears which means that the control box has overheated.
So, allow it to rest for at least 10 minutes before operating the lift again.
Before running the reset procedure on the tabletop, please ensure that all connectors have been unplugged and plugged back in.
If the ASR error code appears, it is important to contact a qualified ASR technician to diagnose and repair the problem.
If the ASR system is not properly repaired, it could lead to further problems down the road.
And you should think about this error problem before paying for the standing desk online or at the store.
How to Reset an UPLIFT Desk?
To reset an UPLIFT Desk, first of all
- Hold the down button again until the desk lowers slightly to the lowest height, then rises slightly.
- Release the button.
If your desk doesn’t start to move after pressing the DOWN button, release the DOWN button and try again.
If the movement starts it means the desk reset was successfully reset.
Your UPLIFT desk is now reset and ready to use!
FAQs
What are Some Benefits of Using a Standing Desk?
Some benefits of using a standing desk are that it can help improve your posture, increase your productivity, and helps to lose weight.
How Long Does it Take to Reset my Standing Desk?
The process of resetting a standing desk can take anywhere from a few seconds to a minute or two.
Why is an ASR Error Important?
An ASR error code is important because it lets you know that something is wrong with your standing desk and it needs to be reset.
Conclusion
A smart electric standing desk lets you know when something is wrong with your desk by displaying an ASR error.
In this article, I’ve discussed what does ASR mean on standing desk and 5 simple ways to solve it.
So, have you ever faced an ASR error, if yes, what did you do you fix it? Let us know in the comments.